Webinar: Rack Safety Program Step-by-Step Guide

ABOUT THE WEBINAR

How do you maintain a secure workspace, adhere to regulations, measure the health and stability of your racking systems, and adopt industry best practices?

Discover the keys to a secure and efficient warehouse environment. Watch our webinar to unravel the complexities of maintaining workplace safety and optimizing operational efficiency in your warehouse.

Impact of warehouse safety on operational efficiency
Reducing risks and downtime through enhanced rack safety
Implementing a robust rack safety program step-by-step
Applying the rack safety blueprint for immediate positive results
Tangible benefits of establishing a safety program

Please fill out the form to watch now:

Learn more about this webinar

Managing warehouse safety can be challenging in a fast-paced, dynamic warehouse environment. Our rack safety expert will explain the actionable steps that can be implemented and the importance of establishing and maintaining a comprehensive rack safety program within your warehouse.

Learn from 35+ years of industry expertise and leave armed with a rack safety blueprint that ensures immediate positive results. Who should attend? Warehouse and facility managers, operational leaders, and health and safety professionals. Gain insights to successfully manage rack safety, mitigate risks, reduce downtime, and transform your warehouse into a secure and highly efficient space.>

Damotech Headquarter in Boisbriand, Quebec, Canada

About Damotech

Damotech is the largest and most trusted rack safety and repair company in North America. For 35 years, Damotech has been helping warehouse owners keep their warehouse environment safe by maintaining their rack’s structural integrity. Damotech’s rack repair and rack protection solutions are safe, cost-effective, and less disruptive to install than alternative solutions, making them the preferred choice of business-minded warehouse operators and safety managers. Damotech also performs rack compliance inspections, load capacity calculations, rack safety training and now offers a state-of-the-art rack inspection management software.

FAQ ABOUT RACK SAFETY PROGRAM

Does OSHA require load capacities?

Yes. OSHA refers to the building code, which requires load capacities to be posted, visible, and accurate. During an inspection, OSHA will look for load capacity placards or labels on the racking systems. If they are missing or inaccurate, this will be noted and must be corrected.

How do I know whether to repair or replace a damaged upright?

This typically comes with training. Having an engineer or inspector perform an initial inspection helps establish a baseline and allows you to learn from the process. Training on identifying rack issues is also important, and Damotech offers this type of training.

Is there a way to determine rack load capacity without using a specialized professional?

No. Online tables provided by OEMs are very basic and do not account for factors such as seismic conditions or beam levels. To determine accurate rack load capacity, a professional engineer must perform the calculations.

Where should I start in the Rack Safety Flywheel?

It depends on your situation. One recommended approach is to start with inspections and then move through insight, maintenance, and prevention. However, if you already have trained staff and conduct regular inspections, you may already have a more advanced program in place. In that case, the focus should be on whether all parts of the flywheel are being addressed—such as actionable insights and maintenance programs. The key is investing time, resources, and effort to build momentum and keep the flywheel moving.

Are third-party rack inspections or certifications required in the United States, and how often should they be done?

There is no specific requirement that defines inspection frequency. Load capacity certifications were discussed, but OSHA generally views inspection frequency from a broad perspective and depends on the level of activity in your warehouse. Inspection frequency is situational and should be guided by warehouse operations. For additional guidance, Damotech recommends reaching out directly to discuss next steps, whether that involves scheduling an inspection, having a call, or receiving more information.

How much damage is too much before a rack needs to be repaired or replaced?

General guidelines exist to help identify racking issues and acceptable tolerances. To learn more, download our Rack Damage Assessment Guide. These guidelines are based on ANSI/RMI, OSHA, and FEM standards. When in doubt, the assistance of a rack professional is recommended.

Do rack baseplates require all four anchors, or are two anchors acceptable?

In most situations, four anchors are not necessary. However, you should always refer to your rack’s Load Application and Rack Configuration (LARC) drawings for specific design requirements. Click here to learn more.

Can load capacities be spray-painted directly onto rack beams?

There are no specific guidelines that prohibit painting load capacities. However, using printed labels or plaques is strongly recommended because they are more flexible. Load capacity is not tied to a single beam or component—it is related to the overall rack configuration. If beams are moved or removed, load capacity may change, which makes painted capacities impractical. For additional information, contact Damotech’s engineering department.

What is the 1-2-3 rule in rack damage assessment?

The 1-2-3 rule is a rule of thumb used to establish the priority for addressing damage on rack columns and braces. Find out more here.

We don’t have in-house resources to manage a rack safety program. Can Damotech help?

Yes. Damotech offers a service plan called DAMO CARE, designed to simplify the initiation and management of a company-wide rack safety program.

FREE WEBINAR
Rack Safety Program Step-by-Step Guide

ABOUT THE WEBINAR

Please fill out the form to watch now:

Learn more about this webinar

SPEAKER

About Damotech

FAQ ABOUT RACK SAFETY PROGRAM

Does OSHA require load capacities?

How do I know whether to repair or replace a damaged upright?

Is there a way to determine rack load capacity without using a specialized professional?

Where should I start in the Rack Safety Flywheel?

Are third-party rack inspections or certifications required in the United States, and how often should they be done?

How much damage is too much before a rack needs to be repaired or replaced?

Do rack baseplates require all four anchors, or are two anchors acceptable?

Can load capacities be spray-painted directly onto rack beams?

What is the 1-2-3 rule in rack damage assessment?

We don’t have in-house resources to manage a rack safety program. Can Damotech help?

Engineering Services

Rack & Warehouse Protection

Rack Damage Repair Kits

Safety Solutions

Content Offers

Safety Videos

Educational Content

Company

Contact

Support

Careers

FREE WEBINARRack Safety Program Step-by-Step Guide

ABOUT THE WEBINAR

Please fill out the form to watch now:

Learn more about this webinar

SPEAKER

About Damotech

FAQ ABOUT RACK SAFETY PROGRAM

Does OSHA require load capacities?

How do I know whether to repair or replace a damaged upright?

Is there a way to determine rack load capacity without using a specialized professional?

Where should I start in the Rack Safety Flywheel?

Are third-party rack inspections or certifications required in the United States, and how often should they be done?

How much damage is too much before a rack needs to be repaired or replaced?

Do rack baseplates require all four anchors, or are two anchors acceptable?

Can load capacities be spray-painted directly onto rack beams?

What is the 1-2-3 rule in rack damage assessment?

We don’t have in-house resources to manage a rack safety program. Can Damotech help?

Engineering Services

Rack & Warehouse Protection

Rack Damage Repair Kits

Safety Solutions

Content Offers

Safety Videos

Educational Content

Company

Contact

Support

Careers

FREE WEBINAR
Rack Safety Program Step-by-Step Guide